
CRTtoLCD-63
The FHD-LCD-Controller solution for LVDS and eDP Displays supports a wide input voltage range from 5V to 32V DC, features multiple video inputs via DVI/HDMI, VGA (through DVI-A or adapter), DisplayPort and eDP for displays up to Full HD, includes line-level audio I/O, enables SmartISP firmware updates, integrates GPIO, ADC inputs and I²C for sensor modules with operating hours and temperature monitoring, and comes complete with comprehensive software tools including Timing-Editor, Serial-OSD, Serial-API, Script Compiler and Logo Converter.
CRTtoLCD-63 is an LCD-Controller that interfaces standard Analog RGB (VGA), DVI (supporting HDMI), DisplayPort sources to an LCD.
From a single 5V to 32V power supply, the CRTtoLCD-63 generates all needed supply voltages, display power sequencing as well as power and control signals for Backlight-Driver. PWM and voltage controlled dimming is supported.
Line-Level Stereo-Sound-Output can be used to drive active speaker systems. Stereo Sound-Source can be selected from Analog-Input(Line-Level), DisplayPort and HDMI(via DVI connector).
With the powerful software tool Configuration Workbench, display timing, mode table as well various configuration like customizing OSD menu or implementing own logo can easily be done.
CRTtoLCD-63 has built-in Scripting-Engine that extends functionality without changing firmware. It also applies access to GPIO’s, ADC’s and I²C for external sensor modules.
SmartISP let you update Firmware by using digital video input (DisplayPort or DVI/HDMI).
All adjusters and parameters are accessible via Scripting, Serial-API and DDC/CI.
CRTtoLCD-63 is designed as successor for CRTtoLCD-61pro-E and CRTtoLCD-62
Scaler
MT9700FCFEAG
High-quality scaling engine (1:1 / Aspect / Full)
Variable sharpness control
Peaking & coring functions for sharpness
enhancement and noise reduction.
Programmable 10-bit gamma correction
Support for sRGB and xvYCC color space
Interlaced inputs supported
Resolution up to 1920×1200@60Hz
DVI 1.0 / HDMI 2.0 compliant receiver with HDCP 2.2
Supports HDMI 8/10/12-bit color depth
Supports Analog-VGA
Resolution up to 1920×1200@60Hz
DP1.4 compliant receiver with HDCP1.4
4 lanes (1.6Gbps / 2.7Gbps per lane)
18 and 24-bit color depth
(IPEX 0.5mm/pitch micro coax connector)
DP1.4 compliant receiver with HDCP1.4
2 lanes (1.6Gbps / 2.7Gbps per lane)
18 and 24-bit color depth
Analog VGA Input
(2×6 Pin-Header / with 2.54mm pitch)
Supports: DSS(Digital Separated Sync), SOG(Sync On Green), CSYNC (Composite Sync)
LVDS Output
Resolution up to 1920×1200@60Hz
Single/Dual-Channel with 18/24-bit color depth
VESA/JEIDA color mapping
Swapping of channel polarity, pairs and Odd/Even
Display-Power up to 2.5A
eDP Output
2 lanes (1.6Gbps / 2.7Gbps per lane)
Backlight-Power and control
Display-Power up to 2A, Backlight-Power up to 3A
Sound Input (Stereo)
Sound Output (Stereo)
Backlight
Flexible backlight adjustment by programmable LUT
Backlight-Power up to 3A
Dimming by Ambien Light Sensor(ALS) module
Peripheries
2x ADC (8-bit resolution)
3x GPIO
1x I²C for sensor modules
OSD
OSD-Menu customizable by software
Specials
On-Board Temperature Sensor
Configuration Workbench for firmware update
and configuration
Scripting Engine to extend functionality
Serial API to provide access to adjusters and data
Serial OSD for remote configuration via COM-port
Supports MCCS via DDC2B/2Bi/2B+/CI
Power Input
Dimensions of Module (PCB)
Article
Part.-No.
Description
CRTtoLCD-63
21097E-00-01-01
FHD LCD-Controller for LVDS and eDP interface
KAB-ADAPT-VGA
61097E-00-01-01
VGA adapter cable with female D-SUB 15(HD)
for panel mounting 2x hex nut with UNC40-4 thread included.
Cable length 150mm
ADAPT-DP-eDP30
61098E-00-01-01
DisplayPort connector on PCB with mounting holes
2x adapters for panel mounting (screws included)
Micro coax cable with lock bars on both sides
Cable length 150mm
OSD-Keypad-5S
22013E-00-01-01
5 button keypad with mechanical switches
Multi-color LED (red/green/amber) for status
Cable length 200mm
Molex PicoBlade 10-Pin (1.25mm pitch)
OSD-Touch-Keypad-5S
22023E-00-01-01
5 button keypad with capacitive touch keys
Multi-color LED (red/green/amber) for status
I²C interface
Cable length 200mm
Molex PicoBlade 5-Pin (1.25mm pitch)
ADAPT-ALS-VEML7700
60008E-00-01-01
Ambient light sensor module with Vishey VEML7700
I²C interface
Cable length 200mm
Molex PicoBlade 5-Pin (1.25mm pitch)
ADAPT-COM-USB
61023E-00-01-01
USB to UART converter (USB to COM-TTL)
Programming adapter for firmware update/configuration
USB-Type-A Connector
Molex PicoBlade 4-Pin(1.25mm pitch)
Cable length 200m
OSD-Panel-Set
(obsolete)
22010E-00-01-01
5 button keypad with mechanical switches
Multi-color LED (red/green/amber)
Cable length 200mm
IDC RM2.54mm (2×6 Pin-Header)
KAB-COMtoTTL
(obsolete)
61021E
RS232 to TTL level converter for firmware update and configuration.
Can be used for all products with TTL-COM-Port
Length 200mm